DESCRIPTION: A fast drying, durable coating designed for marking parking lots, streets, factory and warehouse floors.  May be applied to macadam, asphalt, concrete, brick, wood and properly primed metal surfaces.

PREPARATION: All surfaces should be clean and dry.  Before painting, remove all dirt, grease, oil, excess moisture and other foreign matter.

APPLICATION: Stir thoroughly before using.  Apply by brush, roller, spray or line marking machine.  Paint is supplied ready for use, however, if reducing is required, use clean water up to 20% by volume. Do not apply in rainy weather, or when moisture is present on surface to be painted, or if surface or ambient temperature is below 45°F. Relative humidity should be below 90%.

CLEAN UP: Clean equipment immediately after use with soap and water.

DRYING TIME: Under normal drying conditions, which can be affected by weather conditions like temperature, wind, humidity, sunshine, etc. dries to touch in about an hour. Ready for traffic after 4 hours.

TO TOUCH: In about an hour. Ready for traffic after 4 hours.

COVERAGE: (Width of Line / Approximate Feet per Gallon)

3" / 400-460 Feet per Gallon
4" / 300-345 Feet per Gallon
5" / 250-280 Feet per Gallon
6" / 200-230 Feet per Gallon

CAUTION! Do no take internally. Keep lid on tightly when not in use. Protect from freezing. Use with adequate ventilation. Avoid prolonged contact with skin and breathing of vapors. KEEP OUT OF THE REACH OF CHILDREN